Maximum performance in the smallest spaces
The compact powerhouse.
Do your customers have high demands? Consider it taken care of. That’s because the F 2 edgebanding machine lets you deliver perfect edges to your customers, piece by piece.
Premium quality really is this convincing: the F 2 is the perfect entry-level model of our powerhouse units. You’ll be impressed by its innovative features and compact design. Make room in your workshop for the F 2 from ALTENDORF!
Main Features
Technical Features
- Feed speed 10 m/min
- Greater flexibility of workpiece length
- Higher cover
- Greater ease of use
- Optional flat scraper
- Compact frame design
Benefits
- Interchangeable glue pot can be heated in 3.5 mins
- 3D graphic symbols
- WhisperCut with interchangeable DIA tools
Software/Control
- 15“ LED touchscreen
- Easy-to-read display with integrated 3D feature
- Revolving and tilting control system
- USB interface
- Meter and running time counter
- Resistant to dust
Made for the highest demands.
The main features of the F 2
Pre-milling cutter (WhisperCut)
The WhisperCut jointing system with interchangeable diamond cutting points ensures maximum tool life (manual height adjustment) and tear-free milling results due to an oblique cut through the centre of the panel. Two ready-to-use cutter heads guarantee tear-free milling results, even for demanding materials and surfaces.
By simply swapping the diamond cutting points, this significantly reduces sharpening costs and downtime and no changes to the basic machine settings are required unlike with classic tools. The lightweight aluminium design protects the motors and enhances smooth operation.
The milling depth can be manually adjusted up to 2.0 mm so that you can work to the final dimensions when cutting.
Change over quick heating pot
- Ready for operation in just 3.5 minutes
- Standard interchangeable glue pots with stop function for rapid change of colour or technology (EVA/PUR)
- Tool-free change of glue pot
- Simplified cleaning of glue pot in a matter of minutes
- Teflon coating for effortless cleaning
Pressure zone
These 3 spring-loaded pressure rollers apply optimum pressure to the banded edges. Adhesive residue or dirt can be easily removed thanks to their coating.
Trim saw station
The stable design of the single-motor cross-cut saw with linear guides enables precise sawing of the front and rear workpieces. Simply choose the setting via the touchscreen display on the front of the machine.
Milling station
This combination milling unit allows you to choose between the different machining procedures: Radius / 10° chamfer and flush milling (combination version). The standard setting is conveniently selected via the display on the front of the machine.
The optional 3-point adjustment allows even more flexible processing for different requirements. Changes are instant and reduce downtime to a minimum.
Cleaning agent spraying unit
This spray system applies the cleaning agent to the top and bottom of the workpiece. By applying the cleaning agent, this removes both the separating agent already applied and any impurities or adhesive residue on the panel surface.
Surface scraper
Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.
More Features
Release agent spraying unit
By applying the separating agent to the top and bottom of the workpiece, this prevents any excess adhesive residue from sticking to the workpiece Prior to edging, the spray system casts a fine layer of separating agent over the top and bottom of the workpiece edges. This prevents any excess adhesive from sticking to the workpiece. This option is recommended if regularly working with PUR adhesives.
Protection spraying unit
The lubricant is sprayed onto the edge surface via an additional fine nozzle to prevent damage to sensitive edges or the removal of film due to sensing rollers and sensing shoes.
Pneumatic 3-point adjustment
By upgrading the milling to 3-point adjustment, the radius, chamfer and flush milling (combination blade) can be selected via the display. As a result, protective covers remain closed and this minimises set-up time.
Surface scraper
Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.
Indoor LED illumination
Interior machine lighting for clear setup and maintenance of your machine.
Wheels
The warp-resistant machine base unit allows precise working for years to come.
Whether mass production of small parts or half-size panels, we guarantee a consistent finish each time you work. A well-thought-out extraction system, which requires just one central connection point to your extraction system, allows mostly mobile use of your HEBROCK edge banding machine even in small workshops. All inlet and outlets are found on the machine so that it can be moved as needed using our optional trolley for space-consuming work.
Nesting for milling station and radius scraper
Allows working with tool sharpening and pinhole drilling with a milling unit and radius scraper. The settings can be easily changed via the display on the front of the machine. Scanning of the workpieces takes place underneath the panel.
LED progress indicator
A segmented LED ring indicates whether a new workpiece can be fed directly into the machine, without the need to look at the display. Green means: feed active, machine ready, infeed interlock released. When a work piece is fed in and detected, the ring switches off and gradually fills during machining. Yellow signals a warning, red indicates an emergency stop. If the feed is switched off, the ring remains white.
Texture Finish
A release agent spray system combined with brushes ensures clean joint areas. Adhesive residues and liquids are gently removed – for perfectly cleaned surfaces from matte to high-gloss.
ALTENDORF NEXUS IIoT
With this IIoT platform, you can network your machines – for greater transparency, less downtime, and easier maintenance.
Specifications
Basic Features
|
|
Optional Features
|
|
Technical Details
| Max. pre-milling thickness | 2 mm |
| Max. edge thickness | 3 mm |
| Min/max workpiece thickness | 8 – 50 mm |
| Min. workpiece width | 80 mm |
| Min. workpiece length | 180 mm |
| Feed speed | approx. 10 m/min. |
| Ready for operation | approx. 3,5 min. |
| Max. power consumption | Ø approx. 5,9 kW |
| Electrical connection | 400 V – 3 Ph – 50 Hz |
| Machine dimensions (LxWxH) | approx. 3350 x 1450 x 1500 mm |
| Work table height | 850 mm |
| Extraction socket | Ø 1 x 140 mm |
| Weight | approx. 640 kg |
Accessories
Intelligent accessory for better support during your daily work. Almost always upgradable independent of the machine.
- Additional glue pot
- Pre-milling up to 50 mm workpiece thickness
- Air cushion table
- Additional roller bar
- PUR Box
The F 2 – as diverse as your projects
Plenty of scope for your requirements
Wood
ALTENDORF edgebanding machines are the right choice for just about every type of wood. No matter whether it’s solid wood, chipboard, blockboards, MDF or multiplex, you can always expect precise, clean edge processing (including finishing).
Wood-like (HPL panels)
These HPL panels are available in various dimensions, thicknesses and surface designs. Thanks to ALTENDORF edgebanding machines, they are easy and flexible to work with.
Our machines are suitable for various material dimensions.
Observe the respective technical profile.
Plastic
Edge banding of plastics, such as PP sandwich panels, is a key part of the craft.
With ALTENDORF edgebanding machines, you can enjoy productivity and flexibility as you work. At the same time, you’ll always offer top quality for your customers.
This is what the finest craftsmanship looks like
Top-quality craftsmanship can be seen in the details.
Clean edges are a key quality feature. These high-quality workpieces were produced with plenty of passion, great skill, and an edge banding machine from ALTENDORF. Enjoy this small selection of works from our top performers in the F-SERIES!
Get in touch with us.
Would you like to learn more, do you have specific questions, or do you need advice about our machines? We provide personalized advice—simply contact our experts.
Your service and spare parts service for edgebanding machines
Machine maintenance
Maximize the service life of your machine with a regular check-up. Wear parts are replaced, basic settings are checked. Trust the experienced Altendorf service technicians.
Spare parts service
Are you looking for the right spare part for your machine? It is guaranteed to be available in our large warehouses.
On site service
Our experienced service technicians will look at your defective sliding machine directly at your site and help you as promptly as possible.
Altendorf Downloads
Here you will find brochures, operating instructions and data sheets. All brochures and documents are available online – and just a few clicks away from download.
Configure your dream machine
With the online configurator, you can easily assemble your new machine according to your requirements.
Machines, Solutions & Services
Request brochures, technical data sheets, or further information here free of charge and without obligation—simply click to proceed.
Everything in one place. Everything immediately at hand.
Explore our product brochures, technical details, and brand information, and download exactly what you need.
