ALTENDORF F 5

The lubricant is sprayed onto the edge surface via an additional fine nozzle to prevent damage to sensitive edges or the removal of film due to sensing rollers and sensing shoes.

Plane impacts or milling traces are smoothed down thanks to even cutting by the radius scraper. Settings are adjusted at the front of the machine. The upper and lower edge can be independently selected.

Equip your machine with the optional R2/R1 multi-radius scraper for a unique finishing result with classic ABS edges and modern thin edges. Simply choose the setting via the touchscreen display on the front of the machine – no tools required.

Corner rounding optimally prepares you for any challenge when it comes to dealing with the front of the turning heads. Thanks to intelligent programming via the touchscreen display, individual sides and processing settings can be set.

Whether it’s the front and/or rear edge, radius or chamfer settings or choosing between an entire side or only the vertical edge, there are no limits here. The optional, interchangeable motor combined with our quick-change preliminary setup provides a rapid solution when dealing with different edge thicknesses.

This AC motor optimally prepares your machine for ABS and thin edges.
Tools can be effortlessly changed and the finish improved. No manual reworking required (quick-change preliminary setup required).

Interior machine lighting for clear setup and maintenance of your machine.

The two polishing discs free the upper and lower panel from excess sprays, adhesive residue and lighten in the event of edge stress whitening. 2 x 0.18 kW motors, individually adjustable for consistent cleaning results when using various processing technologies.

The warp-resistant machine base unit allows precise working for years to come.
Whether mass production of small parts or half-size panels, we guarantee a consistent finish each time you work. A well-thought-out extraction system, which requires just one central connection point to your extraction system, allows mostly mobile use of your HEBROCK edge banding machine even in small workshops. All inlet and outlets are found on the machine so that it can be moved as needed using our optional trolley for space-consuming work.

Allows working with tool sharpening and pinhole drilling with a milling unit and radius scraper. The settings can be easily changed via the display on the front of the machine. Scanning of the workpieces takes place underneath the panel.

A segmented LED ring indicates whether a new workpiece can be fed directly into the machine, without the need to look at the display. Green means: feed active, machine ready, infeed interlock released. When a work­ piece is fed in and detected, the ring switches off and gradually fills during machining. Yellow signals a warning, red indicates an emergency stop. If the feed is switched off, the ring remains white.

A release agent spray system combined with brushes ensures clean joint areas. Adhesive residues and liquids are gently removed – for perfectly cleaned surfaces from matte to high-gloss.

With this IIoT platform, you can network your machines – for greater transparency, less downtime, and easier maintenance.

These HPL panels are available in various dimensions, thicknesses and surface designs. Thanks to ALTENDORF edgebanding machines, they are easy and flexible to work with.
Our machines are suitable for various material dimensions.
Observe the respective technical profile.

Edge banding of plastics, such as PP sandwich panels, is a key part of the craft.
With ALTENDORF edgebanding machines, you can enjoy productivity and flexibility as you work. At the same time, you’ll always offer top quality for your customers.