Altendorf WA 80

TWO MODELS, ONE PROMISE: PERFORMANCE, YOU CAN COUNT ON

The WA 80 series convinces above all by its enormous stability.  For you, no matter what material you use - whether panel materials or solid wood - the WA 80 masters every challenge with a maximum saw blade projection of 150 mm. 

Another important feature: the variety of options.  For example, a maximum drive power of 7.5 kW or a maximum cutting length of 4300 mm is possible.  You can equip your machine according to your needs!  This has the advantage for you that your machine then fits exactly to your workshop and your work processes.

request a quote back to overview

Basic equipment in comparison

BASIC EQUIPMENTWA 80 TEWA 80 X
4 kW (5.5 HP), single speed (4000 rpm)
AKE tool clamping system for the main saw balde
Saw blade adjustment
Motorised rise/fall and tilt adjustment 0-46° for the main saw blade
Digital display of the tilt angle
Saw blade protrusion
max. 150 mm, saw blade diameter max. 450 mm
Control panel
on machine frame
at eye level
Sliding table
table length 3000 mm, incl. infinitely adjustable top carriage locking
Rip fence, cutting width 1000 mm
manual adjustment includes fine adjustment
CNC rip fence
Crosscut fence with fixed 90° angle
manual adjustment using graduated scale up to 3200 mm
Motor rating and rotational speed
•  Standard

Tecnical specifications

DUST EXTRACTION CONNECTIONS
Top connectionØ = 80 mm
Bottom connectionØ = 120 mm
Pressure drop1200 Pa with a total connection diameter, Ø = 140 mm
Minimum air requirementVmin = 1110 m3/h at 20 m/sec.
ELECTRICAL POWER REQUIREMENTS1)
Motor4 kW5,5 kW7,5 kW
Voltage380 - 420 V380 - 420 V380 - 420 V
Frequency50 Hz50 Hz50 Hz
Current without / with scorer7,5 / 9,5 A11,5 / 13,5 A15,5 / 17,5 A
Fuses / circuit breakers25 A25 A25 A

 

SLIDING TABLE CUTTING LENGTHS
Maximum cutting lengths when using clamping shoe or crosscut fence
Table length2250 mm3000 mm3200 mm3400 mm3800 mm4300 mm
Cutting length2150 mm2900 mm3100 mm3300 mm3700 mm4010 mm
MAXIMUM SAW BLADE PROTRUSION
With or without scoring saw blade
Saw blade diameter250 mm300 mm315 mm350 mm400 mm4502)
Saw blade protrusion 90°0 - 50 mm0 - 75 mm0 - 82 mm0 - 100 mm0 - 125 mm13 150 mm
Saw blade protrusion 45°0 - 33 mm0 - 50 mm0 - 56 mm0 - 70 mm0 - 87 mm6 - 103 mm
MACHINE WEIGHTstarting at 1000 kg
TABLE HEIGHT910 mm
1) The cross section of the mains cable depends on the machine’s distance from the power source and must be determined by a qualified electrician (Power drop in the input cable ≤ 3 %). Please contact your Altendorf sales partner if your power supply does not match the requirements shown. Workstation noise level 85.2 dB (A).
2) the scoring saw blade must be removed.

 

Price

MachineTable length
Price*
WA 80 TE3000 mm12.890 €
WA 80 X3000 mm16.500 €
*Recommended manufacturers price without VAT,
FCA Minden Incoterms 2010

 

ACCURATE:
THE ALTENDORF WA 80 TE

Ergonomic controls: With the Altendorf WA 80 TE the height and angle of the blade are simply adjusted at the press of a button.

The digital display of the angle remains in your field of vision at all times during the cutting operation.

request a quote download brochure

Basic Equipment WA 80 TE

Machine frame control panel

All functions are easily accessed on the control panel on the machine frame. You can control the rise / fall and tilt of the main saw blade at the touch of a button. The tilt angle is shown on the digital display.

Saw blade protrusion

The WA 80 saw blade protrusion is 150 mm (saw blade diameter 450 mm).

Rip fence with manual fine adjustment, cutting widths 1000 mm

Setting the fence is easy; the precision fine adjustment makes for great accuracy. The hard chrome-plated round bar system ensures the fence moves smoothly. The rip fence drops down clear of the machine table level to free up extra space for dividing large panels.

Crosscut fence with fixed 90° angle, stops to 3200 mm

The crosscut fence with fixed 90° angle earns its corn every day helping out with precision cuts on workpieces of different lengths and formats. The stop can be slid into place easily without lifting. Two flip stops are included.

Sliding table, table length 3000 mm

the table runs on large dumbbell rollers sandwiched between hard chromed guide bars, guaranteeing absolute precision. The system’s large rollers ensure smooth action, meaning the table takes less effort to move and glides as securely as if it were on rails. This quality running will endure decades of heavy load bearing in the constant presence of dust and chips, and it needs virtually no maintenance

Motor rating 4 kW (5.5 HP), single speed (4000 rpm)

Smooth-running and powerful. The Altendorf saw unit is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly: this is because it is electronically bal anced as a fully assembled unit, and extensive use is made of cast components. The high-precision vertical movement of the unit is linear with maintenance-free guide bearings. The robust tilt quadrants incorporate the traditional Altendorf tongue and groove connection system, which allows the whole unit to tilt easily and precisely to exactly the correct angle.

AKE tool clamping system for the main saw blade

optional equipment WA 80 TE


Equip your Altendorf WA 80 with the options you need.
Here you will find our current special accessories for the Altendorf sliding table saw WA 80 TE:

Sliding table options

Table length
Sliding table, table length 2250 mm
Sliding table, table length 3200 mm
Sliding table, table length 3400 mm
Sliding table, table length 3800 mm, with floor support
Sliding table, table length 4300 mm, with floor support
Accessory
On/off switches on sliding table
Pneumatic hold-down beam for sliding table

Motor rating and rotational speed

5.5 kW (7.5 HP), three speeds, 3/4/5000 rpm, manually adjusted
7.5 kW (10 HP), three speeds, 3/4/5000 rpm, manually adjusted
Special electrics
Special electrics for 5.5 kW (7.5 HP), three speeds, 3/4/5000 rpm

Scoring units and accessory

Scoring unit with motorised height and manual lateral adjustment
Accessory
RAPIDO scoring system, adjustment range: 3 - 3,8 mm, ø = 120 mm
LED illumination

Rip fences

Rip fence with manual adjustment
cutting width 800 mm, incl. fine adjustment, using graduated scale
cutting width 1300 mm, incl. fine adjustment, using graduated scale
Rip fence with DIGIT X
cutting width 800 mm, manual adjustment with digital display, incl. fine adjustment
cutting width 1000 mm, manual adjustment with digital display, incl. fine adjustment
cutting width 1300 mm, manual adjustment with digital display, incl. fine adjustment

Crosscut fences

Crosscut fence with DIGIT L
stops to 3200 mm, distance to stops settable using digital display with fine adjustment
Crosscut-mitre fence
stops to 3500 mm, manual adjustment, angles up to 49°, with length compensation
with DIGIT L, stops to 3200 mm, distance to stops settable by digital display, angle and length compensation settable using a measuring scale
with DIGIT LD, stops to 3200 mm, distance to stops and angle settable by digital display, with integrated length compensation
Parallelogram cross slide (PQS)
with digital display of the angle, stops to 3500 mm, manual adjustment, angle up to 47° with digital display, distance to stops and length compensation for the angle, settable using a measuring scale, inlc. 2 flip stops
with DIGIT LD, stops to 3200 mm, movable distance to stops and angle settable by digital display, with integrated length compensation, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead
Accessory
Cross slide extension for crosscut fence/crosscut-mitre fence extends to a distance of 650 mm

Mitre fences

Single-sided mitre fence
stops to 2500 mm
Double-sided mitre fence
DUPLEX, stops to 1350 mm, angle and length settable by scale with magnifiying glass
DUPLEX, stops to 2150 mm, angle and length settable by scale with magnifiying glass
DUPLEX D, stops to 1350 mm, angle settable by digital display, length and length compensation by measuring scale
DUPLEX DD, stops to 1350 mm, both angle and length settable by digital display with length compensation

Further accessory

PALIN/Parallel cutting device, settable using a measuring scale
PALIN/Parallel cutting device, settable using digital dimension display with fine adjustment
Manual quick-action clamp, clamping height to 200 mm
STEG, second support on the sliding table
Front support roller
Laser cutting line marker
Additional cross slide with double floor support rollers

SPACE REQUIREMENTS WA 80 TE

A    Sliding table length + 290 mm
B    Sliding table length + 360 mm
C    Crosscut fence, stops to 2500 mm: 1500 – max. 2630 mm
      Crosscut fence, stops to 3200 mm: 1890 – max. 3420 mm
      Crosscut-mitre fence, stops to 3500 mm: 1960 – max. 3690 mm
D    Cutting width + 310 mm
Machine weight
starting at 1000 kg
Table height
910 mm

 

ERGONOMIC:
THE ALTENDORF WA 80 X

Number one for ease of operation and ergonomics: The Altendorf WA 80 X is easy to operate thanks to the pivoting control panel at eye level and the CNC rip fence. 

request a quote download brochure

Basic Equipment WA 80 X

Eye-level operating panel

All major control functions are always visible. The panel pivots into the most convenient position and is accessible from both sides of the machine. Adjustment of both the saw blade and the rip fence are motorised.

Saw blade protrusion

The WA 80 saw blade protrusion is 150 mm (saw blade diameter 450 mm). This results in a greater cutting height when crosscutting or square
cutting and also when angle cutting with the saw blade tilted.

CNC rip fence, cutting widths 1000 mm

The CNC rip fence has a traverse speed of 200 mm/sec. and an accuracy of +/− 1/10 mm. The high precision five-point recirculating ball spindle system needs little maintenance and, along with the motor, is well protected by its integration into the aluminium profile. The fence detects its position automatically, especially in the danger area around the saw blade, and has an emergency cut-out to prevent the risk of crushing. Dimensions are corrected automatically when the fence is switched between the upright and the flat position or when working with the saw blade tilted.

Crosscut fence with fixed 90° angle, stops to 3200 mm

The crosscut fence with fixed 90° angle earns its corn every day helping out with precision cuts on workpieces of different lengths and formats. The stop can be slid into place easily without lifting. Two flip stops are included.

Sliding table, table length 3000 mm

The table runs on large dumbbell rollers sandwiched between hard chromed guide bars, guaranteeing absolute precision. The system’s large rollers ensure smooth action, meaning the table takes less effort to move and glides as securely as if it were on rails. This quality running will endure decades of heavy load bearing in the constant presence of dust and chips, and it needs virtually no maintenance

Motor rating 4 kW (5.5 HP), single speed (4000 rpm)

Smooth-running and powerful. The Altendorf saw unit is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly: this is because it is electronically bal anced as a fully assembled unit, and extensive use is made of cast components. The high-precision vertical movement of the unit is linear with maintenance-free guide bearings. The robust tilt quadrants incorporate the traditional Altendorf tongue and groove connection system, which allows the whole unit to tilt easily and precisely to exactly the correct angle.

AKE tool clamping system for the main saw blade

Optional Equipment WA 80 X


Equip your Altendorf WA 80 with the options you need.
Here you will find our current special accessories for the Altendorf sliding table saw WA 80 X:

Sliding table options

Table length
Sliding table, table length 2250 mm
Sliding table, table length 3200 mm
Sliding table, table length 3400 mm
Sliding table, table length 3800 mm, with floor support
Sliding table, table length 4300 mm, with floor support
Accessory
On/off switches on sliding table
Pneumatic hold-down beam for sliding table

Motor rating and rotational speed

5.5 kW (7.5 HP), three speeds, 3/4/5000 rpm, manually adjusted
7.5 kW (10 HP), three speeds, 3/4/5000 rpm, manually adjusted
Special electrics
Special electrics for 5.5 kW (7.5 HP), three speeds, 3/4/5000 rpm

Scoring units and accessory

Scoring unit with motorised height and manual lateral adjustment
Accessory
RAPIDO scoring system, adjustment range: 3 - 3,8 mm, ø = 120 mm
LED illumination

CNC rip fences

cutting width 800 mm
cutting width 1300 mm

Crosscut fences

Crosscut fence with DIGIT L
stops to 3200 mm, distance to stops settable using digital display with fine adjustment
Crosscut-mitre fence
stops to 3500 mm, manual adjustment, angles up to 49°, with length compensation
with DIGIT L, stops to 3200 mm, distance to stops settable by digital display, angle and length compensation settable using a measuring scale
with DIGIT LD, stops to 3200 mm, distance to stops and angle settable by digital display, with integrated length compensation
Parallelogram cross slide (PQS)
with digital display of the angle, stops to 3500 mm, manual adjustment, angle up to 47° with digital display, distance to stops and length compensation for the angle, settable using a measuring scale, inlc. 2 flip stops
with DIGIT LD, stops to 3200 mm, movable distance to stops and angle settable by digital display, with integrated length compensation, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead
Accessory
Cross slide extension for crosscut fence/crosscut-mitre fence extends to a distance of 650 mm

Mitre fences

Single-sided mitre fence
stops to 2500 mm
Double-sided mitre fence
DUPLEX, stops to 1350 mm, angle and length settable by scale with magnifiying glass
DUPLEX, stops to 2150 mm, angle and length settable by scale with magnifiying glass
DUPLEX D, stops to 1350 mm, angle settable by digital display, length and length compensation by measuring scale
DUPLEX DD, stops to 1350 mm, both angle and length settable by digital display with length compensation

Further accessory

PALIN/Parallel cutting device, settable using a measuring scale
PALIN/Parallel cutting device, settable using digital dimension display with fine adjustment
Manual quick-action clamp, clamping height to 200 mm
STEG, second support on the sliding table
Front support roller
Laser cutting line marker
Additional cross slide with double floor support rollers

SPACE REQUIREMENTS WA 80 X

A    Sliding table length + 290 mm
B    Sliding table length + 360 mm
C    Crosscut fence, stops to 2500 mm: 1500 – max. 2630 mm
      Crosscut fence, stops to 3200 mm: 1890 – max. 3420 mm
      Crosscut-mitre fence, stops to 3500 mm: 1960 – max. 3690 mm
D    Cutting width + 310 mm
Machine weight
starting at 1000 kg
Table height
910 mm

CONTACT US AND ASK FOR AN NON-BINDING OFFER:

Request WA 80

Please note our privacy policy.

 
*Fields marked with an asterisk are mandatory. Your data will of course be treated confidentially and will not be passed on to third parties.

back to overview